Paper Cutting - Intermediate Level: cut patterns INTERMEDIATE

Master paper cutting concepts through this excellence pursuit practice set. Worksheet 16 of 30 contains 20 intermediate-level problems. Deep dive into cut patterns while learning paper cutting design, cutout shapes, symmetrical cuts. Recommended for mid-level learners aiming for moderate complexity with mixed patterns.

📝 Worksheet 16 of 30 • 20 questions • ⏱️ Estimated time: 20 minutes • 🎯 Intermediate level

What you'll learn in this worksheet:
Your progress through Paper Cutting
Worksheet 16 of 30 (53% complete)

Question 1

A paper is folded first vertically, then horizontally. Then a small triangle cut from the folded corner. What pattern appears when unfolded?
Two perpendicular folds create 4 layers. A cut through all layers appears in all 4 quadrants.

Question 2

This unfolded pattern shows holes at [(30, 40), (70, 40)]. How was the paper folded before the hole was punched?
Two horizontally aligned holes indicate a vertical fold.

Question 3

A paper is folded in half horizontally. A small semicircle cut from the folded edge. What pattern appears when unfolded?
A semicircle cut on a horizontal fold creates a full circle when unfolded.

Question 4

This unfolded pattern shows holes at [(30, 40), (70, 40)]. How was the paper folded before the hole was punched?
Two horizontally aligned holes indicate a vertical fold.

Question 5

A paper is folded with 4-fold rotational symmetry (pinwheel fold). A hole is punched near one edge. What pattern appears when unfolded?
4-fold rotational symmetry creates 4 symmetric holes.

Question 6

A paper is folded in half vertically (left over right). A hole is punched at position (30, 40). What pattern appears when unfolded?

Hole Punch Symmetry - Vertical Fold

Step 1: Paper folded vertically creates left-right mirror symmetry.
Step 2: A hole punched at (30,40) goes through both layers.
Step 3: When unfolded, the hole appears at (30,40) and its mirror (70,40).
Result: Two horizontally aligned holes.

Question 7

A paper is folded with 4-fold rotational symmetry (pinwheel fold). A hole is punched near one edge. What pattern appears when unfolded?
4-fold rotational symmetry creates 4 symmetric holes.

Question 8

A paper is folded first vertically, then horizontally. Then a small triangle cut from the folded corner. What pattern appears when unfolded?
Two perpendicular folds create 4 layers. A cut through all layers appears in all 4 quadrants.

Question 9

A paper is folded in half vertically. A L-shaped cut from the folded edge. What pattern appears when unfolded?
An L-shaped cut on a vertical fold creates two mirrored L-shapes.

Question 10

A paper is folded with 4-fold rotational symmetry (pinwheel fold). A hole is punched near one edge. What pattern appears when unfolded?
4-fold rotational symmetry creates 4 symmetric holes.

Question 11

A paper is folded first vertically, then horizontally. Then a small triangle cut from the folded corner. What pattern appears when unfolded?
Two perpendicular folds create 4 layers. A cut through all layers appears in all 4 quadrants.

Question 12

This unfolded pattern shows holes at [(25, 25), (75, 25), (25, 75), (75, 75)]. How was the paper folded before the hole was punched?
Four holes in a square pattern indicate a quarter fold.

Question 13

A paper is folded in half vertically (left over right). A hole is punched at position (30, 40). What pattern appears when unfolded?

Hole Punch Symmetry - Vertical Fold

Step 1: Paper folded vertically creates left-right mirror symmetry.
Step 2: A hole punched at (30,40) goes through both layers.
Step 3: When unfolded, the hole appears at (30,40) and its mirror (70,40).
Result: Two horizontally aligned holes.

Question 14

A paper is folded with 4-fold rotational symmetry (pinwheel fold). A hole is punched near one edge. What pattern appears when unfolded?
4-fold rotational symmetry creates 4 symmetric holes.

Question 15

A paper is folded first vertically, then horizontally. Then a small triangle cut from the folded corner. What pattern appears when unfolded?
Two perpendicular folds create 4 layers. A cut through all layers appears in all 4 quadrants.

Question 16

A paper is folded in half vertically. A small triangle cut from the folded edge. What pattern appears when unfolded?
When a vertical fold is cut, the cut appears mirrored across the fold line.

Question 17

A paper is folded in half horizontally (bottom over top). A hole is punched at position (40, 30). What pattern appears when unfolded?

Hole Punch Symmetry - Horizontal Fold

Step 1: Paper folded horizontally creates top-bottom mirror symmetry.
Step 2: A hole punched at (40,30) goes through both layers.
Step 3: When unfolded, the hole appears at (40,30) and its mirror (40,70).
Result: Two vertically aligned holes.

Question 18

A paper is folded in half vertically. A L-shaped cut from the folded edge. What pattern appears when unfolded?
An L-shaped cut on a vertical fold creates two mirrored L-shapes.

Question 19

A paper is folded twice (quarter fold). A hole is punched at position (25, 25). What pattern appears when unfolded?

Hole Punch Symmetry - Quarter Fold

Step 1: Paper folded horizontally then vertically creates 4 layers.
Step 2: A hole punched at (25,25) goes through all 4 layers.
Step 3: When unfolded, the hole appears in all 4 quadrants.
Result: Four holes forming a square pattern.

Question 20

A paper is folded twice (quarter fold). A hole is punched at position (25, 25). What pattern appears when unfolded?

Hole Punch Symmetry - Quarter Fold

Step 1: Paper folded horizontally then vertically creates 4 layers.
Step 2: A hole punched at (25,25) goes through all 4 layers.
Step 3: When unfolded, the hole appears in all 4 quadrants.
Result: Four holes forming a square pattern.
Previous Worksheet Next Worksheet